Chapter 1: System operation
EST iO64 and iO500 Technical Reference Manual
17
Event ID numbers and descriptions
Event ID
Event description
000 Loop
1
initialization:
Loop 1 is starting up
001
Loop 1 fault: A short or open was detected on loop 1
affecting the communications between the panel and the
devices on the loop
002
Loop 1 map fault: A mapping fault was detected on loop 1
while the panel was mapping the devices
003
Loop 1 card fault: The loop 1 card is not present or it is not
working properly
004
Loop 1 uncfgrd alarm: A device on loop 1 that is not
programmed went into alarm
005
Loop 1 uncfgrd trouble: A device on loop 1 that is not
programmed went into trouble
006
Loop 1 map mismatch: The loop 1 map in RAM and the
loop 1 map in the database do not match
007
Loop 1 over limits: There are too many devices on loop 1
008
Loop 1 device 000: A device on loop 1 has an address set
to zero
009
Loop 1 mapping: Loop 1 is mapping its devices
010 Loop
2
initialization:
Loop 2 is starting up
011
Loop 2 fault: A short or open was detected on loop 2
affecting the communications between the panel and the
devices on the loop
012
Loop 2 map fault: A mapping fault was detected on loop 2
while the panel was mapping the devices
013
Loop 2 card fault: The loop 2 card is not present or it is not
working properly
014
Loop 2 uncfgrd alarm: A device on loop 2 that is not
programmed went into alarm
015
Loop 2 uncfgrd trouble: A device on loop 2 that is not
programmed went into trouble
016
Loop 2 map mismatch: The loop 2 map in RAM and the
loop 2 map in the database do not match
017
Loop 2 over limits: There are too many devices on loop 2
018
Loop 2 device 000: A device on loop 2 has an address set
to zero
019
Loop 2 mapping: Loop 2 is mapping its devices
020
System startup: The control panel is starting up
021
Program mode: The control panel is in program mode
022 Reset:
The
control panel is resetting
