GE Druck ADTS 405 R/F Mk2, Instruction Manual

Page: 114 / 122

Chapter 6. REFERENCE AND SPECIFICATION
96 | ADTS 405 Mk2 Instruction Manual-English © 2015 General Electric Company – All rights reserved.
6.2.59.32 CONFIG, REMOTE
This function disables the front panel key-pad and allows the ADTS 405 to be controlled by a
remote device such as a PC. The front panel display shows the “REMOTE” message. To return to
“LOCAL” control (key-pad) press LOCAL/REMOTE key, the remote device can disable this key.
Note:
Some ATE systems may require the ADTS 405 set in the remote mode
before the remote device starts communicating. If remote lock is disabled, set
the ADTS 405 while in local control, by pressing the REMOTE/LOCAL key
.
CAUTION
CHANGING BETWEEN SETS OF LIMITS CAN CAUSE DAMAGE TO SENSITIVE
INSTRUMENTS. ENTERING CONFIG DISABLES LOCK OUT THERE ARE TWO SETS OF LIMITS:
“REMOTE” AND “LOCAL”.
6.2.59.33 CONFIG, ETP, [AUTO RUN]
Causes a down-loaded test program to operate (Execute Test Program) on power-up. See the Test
Program Manager User Manual for further details.
6.2.59.34 CONFIG, ETP, [ERASE PROGRAMS]
Removes a down-loaded test program from non-volatile memory. See the Test Program Manager
User Manual for further details.
6.2.59.35 CONFIG, ETP, [RESULT]
1. Configures the PRINT/SAVE mode as in set-up mode.
2. Selects and deletes a result file stored in the ADTS 405.
6.2.59.36 CONFIG, NUDGE
CONFIG equivalent of SETUP function.
6.2.59.37 CONFIG, 000
1. This function enables, changes or disables the CONFIG PIN code protecting access to
CONFIG menu.
2. When enabled, the PIN must be entered before it can be changed. The prompt asks for “Enter
existing PIN”, then a new PIN can be entered. This must comprise four numeric digits.
3. Once entered, the prompt asks for the new PIN again to protect against data entry errors.
To disable the PIN, so that CONFIG can be entered without a PIN, enter 0000.
Note:
Access to maintenance functions may also be PIN protected. This PIN
number is not the same as the CONFIG PIN.