– 67 –
7. Use new clamp included with the new pump
or the clamp kit (Part #: WD35X10382) when
reinstalling.
When reassembling, position the hose properly onto
the locating feature on the sump.
Drain Pump Removal or Replacement
1. Remove power to the dishwasher.
2. Remove the door (consult Door Removal section
of this service guide).
3. Remove the sump assembly (see Sump Removal
section of this service guide).
4. To remove the harness connector, press in on
the tab, then pull to remove the connector.
5. Loosen or remove the Drain Pump Bracket.
6. Loosen the hose clamp and discard, remove or
replace the drain pump.
Mounting Screw
Grommet
Bracket
Drain
Pump
Clamp
