– 34 –
Components
Bar Handle
The bar handle is attached to the outer door panel.
The handle is an assembly with end caps pre-
attached.
Bar Handle Removal
1. Remove and separate the door.
2. Remove two 3/8 in. hex head screws holding the
handle.
Top Control Console Cover Removal
1. Remove and separate the door.
2. Remove the bottom cover, UI, light pipe and
buttons.
3. Remove the top console and cover as an
assembly. There are six 1/4 in. hex head screws,
securing the assembly to the inner door (note
the length of the screws). A new cover should
be replaced in the event the cover is loose or
must be removed. The tabs are likely to break on
removal.
Installing a New Top Cover
1. The top cover is secured with sixteen tabs, and
the console has cutouts or slots to allow the top
cover to click-lock together.
2. Position the tabs on the cover into the slots on
the console.
3. Press the top and console securely together and
slide the parts to engage the tabs into the slots.
Start from one end and work across to the other
HQG$VHULHVRI¿YHDXGLEOHFOLFNVZLOOEHKHDUG
as the cover and console snap together.
Six 1/4 in. hex
head screws
Hinges
Top Control Console Cover
Outer Door Panel
To remove the hinges from the outer door panel,
remove six 1/4 in. hex head screws.
Lens
Handle
Handle Screws
Handle Brackets
Hinge Screws
Hinges
Badge
