GE CASE V6.7 Operator'S Manual Download Page 84

Page: 84 / 342

5-12

CASE

Revision C

2060290-201

Post Test Review

The

Modify...

buttons allow you to edit or complete the data in the

respective areas.



Patient Information

: The

Patient Information

window opens.



Test Information

: The

Test Information

window opens.



Measurement Results

: A window opens where you can edit the

measurement results. Edited measurement results are identified
with the * symbol. In the same window you can select and deselect
the

View system evaluation

feature. This feature also affects the

printout, the combined report, the transfer to MUSE and data
export.



Interpretation

: A window opens where you can generate the test

interpretation (see section

“Generating the Interpretation”

on page 5-

27).

Note

Changes to the patient information will only affect the current test;
previous tests of the same patient remain unaffected.

Click to return to the initial screen.

Summary of Contents for CASE V6.7























































































































































































































































































































































Search results

Summary of Contents for CASE V6.7

Reviews:

Related manuals for CASE V6.7

Brands by name

Popular brands

GE CASE V6.7, Operator'S Manual

Search results

Summary of Contents for CASE V6.7

Reviews:

Related manuals for CASE V6.7

Brands by name

Popular brands