manualshive.com logo in svg

GE CASE V6.7, Operator'S Manual

The GE CASE V6.7 Operator's Manual is a comprehensive guide designed to assist users in understanding and operating the product efficiently. This downloadable manual is available for free and can be easily accessed and downloaded from manualshive.com. Gain complete knowledge and maximize the potential of your GE CASE V6.7 with this user-friendly manual.

Share
Download
background image

Revision C

CASE

6-49

2060290-201

After the Test — Post Test Review

Printing the Full Disclosure ECG

You can either print the entire full disclosure ECG or a selected segment. 

Selecting an ECG Segment

1. Click to mark the beginning of the segment. A flag appears. 

2. Click again to mark the end of the segment. A second flag appears.

Printing

1. Click the printer icon. The print setup window opens.

2. Select the paper speed.

3. Click the Format-1 option button, if you wish to print only one lead.

4. Select the lead.

5. Click the Format-2 option button, if you wish to print multiple leads, 

and select the leads.

6. This box indicates the number of pages to print; check paper supply 

before printing. 

7. Click the 

Save

 button to save the print setup.

8. Initiate the printout or close the window with 

Cancel

.

Note

To save or print a 12-lead ECG, enable the zoom function as 
described below. With button B you are then able to save or print the 
ECG strip.

517A-R

6

2

3

4

8

7

5

Summary of Contents for CASE V6.7























































































































































































































































































































































Reviews:

No comments

Related manuals for CASE V6.7

Gaspardo SP SPRINT Manual preview
SP SPRINT
Brand: Gaspardo Pages: 16
Gastrodomus PH100 Installation, Operating And Service Instructions preview
PH100
Brand: Gastrodomus Pages: 4
HANYOUNG NUX HL Series Instruction Manual preview
HL Series
Brand: HANYOUNG NUX Pages: 2
Gastrodomus CL Instructions For Use And Maintenance Manual preview
CL
Brand: Gastrodomus Pages: 39
D+H RZN 43-E Series Operation preview
RZN 43-E Series
Brand: D+H Pages: 2
Qnergy PowerGen 5650 Series Installation & Commissioning preview
PowerGen 5650 Series
Brand: Qnergy Pages: 10
Fri-Jado STG 5-I Instructions Manual preview
STG 5-I
Brand: Fri-Jado Pages: 48
Janschitz Milky 13360 Operating Instruction preview
Milky 13360
Brand: Janschitz Pages: 40
Dangerous power FUSION FX Owner'S Manual preview
FUSION FX
Brand: Dangerous power Pages: 38
CM Promarks TM-1000 Operation Manual preview
Promarks TM-1000
Brand: CM Pages: 8
Vega Industries VLB-5X Installation And Operation Manual preview
VLB-5X
Brand: Vega Industries Pages: 53
Weider 100 Bench User Manual preview
100 Bench
Brand: Weider Pages: 16
CHART Nomad 830G MP Product Manual preview
Nomad 830G MP
Brand: CHART Pages: 30
DANPHONE Futronic MKII User Manual preview
Futronic MKII
Brand: DANPHONE Pages: 65
Sears Trimming Traditions 30 IN ICY RACCOON Owner'S Manual preview
Trimming Traditions 30 IN ICY RACCOON
Brand: Sears Pages: 2
Langmatz EK 533 plus 2.0 Operating Instructions Manual preview
EK 533 plus 2.0
Brand: Langmatz Pages: 60
Laserworld BLUE-400-445 Manual preview
BLUE-400-445
Brand: Laserworld Pages: 4
Okuvision OkuStim Instructions For Use Manual preview
OkuStim
Brand: Okuvision Pages: 36

Brands by name

Popular brands

Load more brands