GE CASE V6.7 Operator'S Manual Download Page 37

Page: 37 / 342

Revision C

CASE

2-7

2060290-201

CASE System

5. Turn on CASE with the power button on the side panel. The program

will start up automatically and the Windows screen appears.

6. Log on to the system.

7. Double-click the CASE icon.

8. If the local database window appears, click

Cancel

9. The initial CASE screen will appear.

When you see the initial CASE screen (see

“Initial Screen”

on page 2-16)

and no error message appears, the system is operational.

Note



The screen saver is automatically disabled during ECG
acquisition.



Scan the hard drive for viruses once a week.



Run a functional test on a regular basis (about once a month);
this includes an inspection of the cables and other accessories for
signs of damage.

Power button

Side Panel

Summary of Contents for CASE V6.7























































































































































































































































































































































Search results

Summary of Contents for CASE V6.7

Reviews:

Related manuals for CASE V6.7

Brands by name

Popular brands

GE CASE V6.7, Operator'S Manual

Search results

Summary of Contents for CASE V6.7

Reviews:

Related manuals for CASE V6.7

Brands by name

Popular brands