GE CASE V6.7 Operator'S Manual Download Page 46

Page: 46 / 342

2-16

CASE

Revision C

2060290-201

Initial Screen

Initial Screen

Note

For system users not familiar with handling the PC mouse, the basic
functions are explained on the next page.

Refer to section

“Country Settings Tab”

on page 12-59 for

information on selecting the language and on toggling between text

06A

C
D
E

New Test

- Click to start a new test.

Local Database

- Click to display the contents of the local database for

selection of a patient and test.

Archived Data

- Click to view patient records archived on a CD-ROM.

MUSE Browser

- Click to display the MUSE system database.

Operator's Manual

- Click to display the Operator's Manual (see

“Viewing

and Printing the Operator's Manual”

on page 2-17).

System Configuration

- Click to display the

System Configuration

(see

“System Configuration”

on page 12-40).

Remote View

- Click to view exercise tests performed at remote stations

(see section

“Monitoring of Remote Exercise Test Workstations”

on page

6-60).

Quit Program

- Click to exit from the program.

Summary of Contents for CASE V6.7























































































































































































































































































































































Search results

Summary of Contents for CASE V6.7

Reviews:

GE CASE V6.7, Operator'S Manual, Page: 46 / 342

Search results

Summary of Contents for CASE V6.7

Reviews: