background image

Care and 

USER 
INSTRUCTIONS

Turn air conditioner off and
remove plug from wall outlet
before cleaning.

Grille & Cabinet

Wipe front grille with a clean cloth
lightly dampened with mild liquid

 detergent. Wash cabinet

with mild soap or detergent and
lukewarm water.

 

These coils on the weather side
of the unit should be checked
periodically and cleaned if clogged
with dirt or soot from the atmosphere.
If extremely soiled, they may need
to be steam cleaned, a service
available through your GE service
outlet.

 Grille 

The front grille can be removed to
make the air filter accessible, allow

more thorough cleaning or make the
model and serial numbers easier to
read.

I

/-

To remove the grille, unscrew

 attachment 

 on each side of

the grille. Then grasp both sides of
the grille and pull it forward and off.

To replace the grille, lineup the
tabs on the grille with the holes in
the cabinet, insert the attachment
knobs and screw them finger tight.

Air 

The air filter behind the front 
should be washed at least 

 30

days or as often as it needs
cleaning.

To remove the filter, first remove
the front grille, then carefully
unhook the filter from the frame.

Vacuum the filter on the dusty side
to remove light dust. Wash the filter,

 side up, under 

 flowing

water to wash out accumulated dust
and lint. If the filter is very dirty,
use a mild household detergent in
the wash water. Let the filter dry
thoroughly before replacing it.

After cleaning the filter, put it
back into place and replace the
front grille.

5

Summary of Contents for AVD14













Reviews: