3. Install Window
Rotate the filler panel backward
toward the window frame until the
filler panel clears the window
1. Measure distance “X” between
stool. Push the filler panel down
the face of the window stop molding
against the window sill.
and the side of the cabinet.
I
of
Stop Molding
\
I
Side of Cabinet
Position 3 Position 2
I
Slide the filler panel out from the
air conditioner cabinet until the
filler panel flange contacts the
window stop molding (position 3).
2. Subtract one groove (3/16”) from
4. Attach the filler
to the
6. Pull the bottom window sash
down tightly and lock it in place by
installing a
A screw through
the hole in the slider into the
window sash.
4.
into Cabinet.
1.
Slide the chassis into the cabinet
the “X” measurement to obtain the
face of the window
molding by
required width. Using a sharp knife,
driving upholsterers’ tacks through
and insert the line cord into the
mark the groove until the filler panel
the holes in the filler panel flange.
notch in the cabinet. Make sure the
front of the chassis is flush with the
becomes weak enough to break
apart.
‘X” Minus One Groove (3/16”)
Filler
3. Insert the cut edge of the filler
panel into the cabinet side seal
groove (position 1). Leave a small
space at the bottom of the cabinet
side seal groove.
Cabinet
Cabinet Side Seal
\
-——
1
Stop Molding
Upholsterers’ ,
Tack
.
Holes in
‘
1!
I
of
Window
Molding
5. Pull the sliders out until the
sliders contact the face of the
window stop molding.
Hole in Slider
I
I
II
front of the cabinet.
Cord
2. Cut the plastic foam seal to the
proper length and insert it between
the upper and lower window sash.
5. Attach Dial Plate and
Control
6.
and
front Grille.
See page 5.
(continued next page)
9
