Window Mounting
Window Requirements
2. -Cabinet in Window.
This air conditioner is factory-
1. Open the window and mark the
prepared for installation in standard
center of the window stool. Carefully
double-hung windows with
place the cabinet in the window and
●
actual opening width of
to
●
vertical opening of 16”
minimum from bottom of sash
to stool.
to
min.
align the center mark on the bottom
tie bar with the center mark on the
window stool.
I
Retainer Bar
Bottom Tie Bar
For instillation in windows with
a minimum opening width of
2. Close the window until it touches
see page 10.
behind the top retainer bar. Do not
close it so
that the sliders
Note: All supporting parts should
cannot move. (Do not release your
be secured to firm wood, masonry
grip on the cabinet until the lower
or
window sash is in its
position.)
1. Remove the Chassis.
3.
the cabinet to the window
stool by driving
A screws
Slide the chassis out of the cabinet
through the
track into the
the chassis forward
window stool.
while
the cabinet. Remove
I
the screen, if necessary, and
Type A Screw
replace it after installation.
Cabinet
Screen
4. Loosely attach the sill bracket
to the support bracket, using the
carriage bolt and flange nut.
Bracket
1
.
I
5. Using the
B machine screw
and flange nut,
the support
bracket to the cabinet track. Use
the track hole that aligns with the
bracket on the outer edge of the
window sill.
Attach the sill bracket to the
window sill using
A screws.
Tighten the carriage bolt and
flange nut.
Be sure the cabinet maintains its
outward pitch. This allows the air
conditioner to slant
downward
on the outside and prevents water
from entering the room.
of
I
Cabin
Track
Support
\
Carriage Bolt
and Flange Nut
8
