![background image](http://html.mh-extra.com/html/ge/as0cd09-series/as0cd09-series_technical-service-manual_2198768031.webp)
29
Chassis
Grille
Remove Screws (3 places)
(5) Checking the Drainage and
Connecting the cable to
Indoor unit
1) Checking the Drainage
1. Remove the Grille from the cabinet.
•
Set the up-and-down air direction louver to open position
(horizontally) by finger pressure.
•
Remove 3 screws
•
To remove the Grille, pull lower left and right side of the
Grille toward you (slightly tilted) and lift it straight upward
(Four tabs on the top inside edge of chassis are clear of
their slots).
2. Check the drainage.
•
Pour a glass of water on the evaporator.
•
Ensure water flows through drain hose of indoor unit to
outdoors.
Summary of Contents for AS0CD09 Series
