GE Amersham Imager 600 Operating Instructions Manual Download Page 78

Page: 78 / 226

Action

Step

Check the Static IP radio button in the Network window.

Select the:

IP address field and use the keypad to enter the IP address.

Subnet mask field and use the keypad to enter the subnet mask.

If desired, select the :

•

Gateway field and use the keypad to enter the router.

•

Workgroup field and use the keypad to enter the workgroup.

Select OK to save the changes.

Result: The connection to the network will be established within a couple of
seconds.

Amersham Imager 600 Operating Instructions 29-0645-17 AD

4 Installation

4.4 Network
4.4.1 Network setup

Summary of Contents for Amersham Imager 600



































































































































































































































Search results

Summary of Contents for Amersham Imager 600

Reviews:

Related manuals for Amersham Imager 600

Brands by name

Popular brands

GE Amersham Imager 600, Operating Instructions Manual

Search results

Summary of Contents for Amersham Imager 600

Reviews:

Related manuals for Amersham Imager 600

Brands by name

Popular brands