GE Amersham Imager 600 Operating Instructions Manual Download Page 73

Page: 73 / 226

Action

Step

To return to the Settings window select the OK button.

Confirm the software, Firmware and FPGA version numbers are correctly
updated.

Export log

Follow the instructions below to export a log from Amersham Imager 600.

Action

Step

Select the Export log button.

Result: A text file will be created on the instrument containing the export log
file.

Insert a USB flash drive and confirm insertion by selecting the OK button.

Result: The export log file will be transferred to the USB flash drive.

To return to the Settings view, select the OK button.

Amersham Imager 600 Operating Instructions 29-0645-17 AD

4 Installation

4.3 System settings

4.3.4 Service

Summary of Contents for Amersham Imager 600



































































































































































































































Search results

Summary of Contents for Amersham Imager 600

Reviews:

Related manuals for Amersham Imager 600

Brands by name

Popular brands

GE Amersham Imager 600, Operating Instructions Manual

Search results

Summary of Contents for Amersham Imager 600

Reviews:

Related manuals for Amersham Imager 600

Brands by name

Popular brands