GE Amersham Imager 600 Operating Instructions Manual Download Page 49

Page: 49 / 226

Function

Part

Buttons for captured images. A blue text and frame highlights the displayed
image(s).

Note:

By selecting two or more images a composite image is displayed.

For more information on displayed images for the different capturing
methods see

Section 5.5 Capture an image, on page 93

If the colorimetric marker
option was checked the
tabs will display Sample
and Marker.

If a multichannel fluores-
cence capture was per-
formed, the tabs will dis-
play the selected channels
of Blue, Green, and Red.

Information icon: use to access additional image and exposure information
such as image file name and exposure time.

Amersham Imager 600 Operating Instructions 29-0645-17 AD

3 Instrument description

3.5 Instrument software description

3.5.3 Description of the image view

Summary of Contents for Amersham Imager 600



































































































































































































































Search results

Summary of Contents for Amersham Imager 600

Reviews:

Related manuals for Amersham Imager 600

Brands by name

Popular brands

GE Amersham Imager 600, Operating Instructions Manual

Search results

Summary of Contents for Amersham Imager 600

Reviews:

Related manuals for Amersham Imager 600

Brands by name

Popular brands