49
To create (and change) a user
The procedure to create a user may vary depending on whether you are creating a user higher than 200 or
higher than 1000.
1. Access menu option 14 and press
3
to create a user.
The display shows:
Example:
Create User
User No:
2. Select the system user number (card number) and press
[ENTER]
.
The display shows the users alarm group.
Example:
*-View, Alm Grp:1-No Access
Alarm Group:
3. Do one of the following options:
Option Action
Select the number of the
alarm group
to be issued to this user.
See Note 2
Enter the zone number and press
[ENTER]
Display the list of
alarm groups
that you can issue to a user (if any)
Press
[NEXT]
Move on to next display
Press
[ENTER]
The display shows the user
door group
.
Card users
must always
have a valid
door group
assigned in order to perform alarm control or door functions.
Example:
Door Group: 0
Door Group:
4. Enter the door group number to be issued to the user (if any), or press
[ENTER]
to move to the next
display.
The display shows the user
floor group
.
Example:
Floor Group: 0
Floor Group:
5. Select the floor group number to be issued to the user (if any), or press
[ENTER]
to move to the next
display.
6. If the user number that you are programming is higher than 1000, and User Flags are not displayed in your
system, then all the options available have been programmed and the display will return to step 1.
If the system has been programmed so that users do not have name files, or if you are programming a user
higher than 200 and User Flags are not displayed, skip to step 10.
With file names, skip to step 8.
