43
13. Start auto Disarm test
Use this function to start the disarm test.
To start the disarm test
1. Access menu option 13.
The display shows:
Disarm Test, NEXT For Untested
"0"-Cancel:
2. Press:
•
[NEXT]
to display the untested zones, or
•
0
and
[ENTER]
to cancel the arm test and move on to test completed/not completed
display.
3. If you have pressed
[NEXT]
, the untested zones are displayed either one at a time or as a list:
Zones displayed one at a time
Zones displayed as a list
For example:
Untested Disarm On 4. PIR In Office
NEXT or ENTER
For example:
Untested On 1, 2, 4.
Zone No:
4. For either display, you can now:
Option Action
Display the description of the selected zone (when displayed as
a list of numbers only)
Enter the zone number and press
[ENTER]
Display the remaining untested zones (if any)
Press
[NEXT]
Move on to the Camera Test or Test Completed/Not Completed
display
Press
[ENTER]
5. The display might shows information about cameras:
All Cameras Have Tested Successfully
Press ENTER
Press
[ENTER]
to return to the original option display.
Note that only cameras allocated to Area 1 are tested.
6. The testing automatically stops when:
•
all zones that are programmed to be tested during disarm test have been tested, or
•
the time allowed for the disarm test has expired.
The display then indicates if the test is completed or not.
