GE Adora DFE29JG Technical Service Manual Download Page 5

Page: 5 / 91

– 5 –

The 2012 Pro

le and GE French Door Refrigerators have the following features:

• Available in 23-29-cubic foot capacity

• ENERGY

STAR

quali

• Integrated Dispenser with Crushed Ice, Water,

and Actual Temperature Display

―

Features

easy-to-reach, easy-to-read temperature
controls and a setting to quickly restore proper
temperature after frequent door openings.

• Advanced

ltration system

―

GE’s

exclusive

ltration system removes harmful

pharmaceuticals from water and ice.

• In-the-door

lter

―

Located in the door for more

available space in the fresh food section and
easy replacement.

• Seamless stainless steel water/ice dispenser

with pullout tray

―

Gives a streamlined look

while easily allowing the

lling of tall items.

• Hands-free Auto Fill

―

Allows you to walk away

while the dispenser automatically

lls most

containers with

ltered water.

• Space-saving icemaker in the door and an additional icemaker on some models

• Stainless steel doors with hidden hinges

―

Offer a sleek

nish with the clean look of concealed hinges.

• An articulating door mullion attached to the left-side door provides a movable center mullion that

maximizes access to the fresh food compartment.

• Secure-Close Door Systems

―

Securely pulls the doors and drawers shut.

• TwinChill™ with Dual Evaporators

―

Uses 2 evaporators to help maintain temperature and humidity

levels to keep foods fresh.

• Most

Pro

le models have a full-width deli pan with 5 electronically controlled temperature settings and

LED lighting. Other models have a full-width deli pan with a mechanically adjustable temperature control
without LED lighting.

• An external air thermistor changes the control setting based on ambient condition to keep the fresh food

and freezer at the correct temperature.

• TurboCool

―

Rapidly cools the refrigerator compartment in order to more quickly cool foods.

• TurboFreeze

―

Rapidly cools the freezer compartment in order to more quickly freeze foods.

• LED Pin-Point Lighting

―

Casts a clean, beautiful light throughout the fresh food and freezer.

• Available in white or black

nish or stainless wrap.

• Drop-down

tray

―

Allows for extra door storage when you need it and tucks away when you don’t.

Introduction

Note:

Features may vary by model.

Summary of Contents for Adora DFE29JG




























































































Search results

Summary of Contents for Adora DFE29JG

Reviews:

Related manuals for Adora DFE29JG

Brands by name

Popular brands

GE Adora DFE29JG, Technical Service Manual

Search results

Summary of Contents for Adora DFE29JG

Reviews:

Related manuals for Adora DFE29JG

Brands by name

Popular brands