GE 30524 Page 82 User Manual Download

Page: 82 / 87

Appendix

• Products that have been repaired, altered or modified by anyone other than

CCT or its authorized service representative.

•

Problems caused by signal conditions, radio interference, network reliability,

cable or antenna systems.

•

Damage caused by use of non CCT accessories or misapplication.

•

Products whose serial numbers have been removed, altered or rendered

illegible.

•

Products purchased, shipped from, used or serviced outside the United

States.

•

Batteries.

•

Products used for business, commercial or institutional purposes.

•

Damage caused by acts of nature such as, but not limited to, lightning

damage.

•

Products returned without valid proof of purchase.

How To Obtain Warranty Service
Call our customer service center at 1-877-394-9775. Our customer service

specialist will assist you in obtaining warranty service. Please have a paper and

pencil handy to write down the warranty service return instructions.
-OR-
You may visit our web site at www.gephones.com for troubleshooting, FAQs,

and information on warranty service.
Accessibility
If you have a disability or questions about how CCT’s products can

accommodate persons with disabilities, please call our customer service center

at 1-877-394-9775. When calling, please let our specialists know that you have

an inquiry about accessibility so your call is routed properly.

Summary of Contents for 30524
























































































Search results

Summary of Contents for 30524

Reviews:

Related manuals for 30524

Brands by name

Popular brands

GE 30524, User Manual

Search results

Summary of Contents for 30524

Reviews:

Related manuals for 30524

Brands by name

Popular brands