GE 30524 Page 78 User Manual Download | Manualshive

Page: 78 / 87

background image

Appendix

74

equipment, operations or procedures where such action is required in the

operation of its business and not inconsistent with FCC Rules and Regulations. If

these changes are expected to affect the use or performance of your telephone

equipment, the telephone company must give you adequate notice, in writing,

to allow you to maintain uninterrupted service. This device complies with Part

15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference; and (2) This device must accept

any interference received, including interference that may cause undesired

operation. This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a

residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.
Privacy of Communications may not be ensured when using this product.
If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the

following measures:

•

Reorient or relocate the receiving antenna (that is, the antenna for radio or

television that is “receiving” the interference).

•

Reorient or relocate and increase the separation between the

telecommunications equipment and receiving antenna.

•

Connect the telecommunications equipment into an outlet on a circuit

different from that to which the receiving antenna is connected.

If these measures do not eliminate the interference, please consult an

experienced radio/television technician for additional suggestions. The changes

or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.
Hearing Aid Compatibility (HAC)
This equipment meets FCC standards for Hearing Aid Compatibility
If this product has a memory dialing feature, you may choose to store

emergency phone numbers such as police, fire or medical within the memory

locations. If you do store or emergency numbers, we suggest you also write

«
...
76
77
78
79
80
...
»

Summary of Contents for 30524
























































































Reviews:

No comments

Related manuals for 30524

Brand: Dai Telecom Pages: 21

Brand: Uniden Pages: 36

Brand: EMPORIA Pages: 16

Brand: Swisscom Pages: 14

Brand: AT&T Pages: 40

Brand: Memorex Pages: 19

Brand: Panacom Pages: 10

Brand: VTech Pages: 2

PHONECELL SX3e AMPS

Brand: Telular Pages: 26

Clearsound AmpliDECT230

Brand: Geemarc Pages: 1

Brand: GE Pages: 9

KX-DT 333 Series

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 16

Easy-Phone KX-T4000

Brand: Panasonic Pages: 21

EASA-PHONE KX-T3716NZ

Brand: Panasonic Pages: 24

Factory Line 100-60

Brand: Panasonic Pages: 32

EASA-PHONE KX-T4006NZ

Brand: Panasonic Pages: 38

Easa-Phone KX-T3910

Brand: Panasonic Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands