GE 30524 Page 73 User Manual Download

Page: 73 / 87

Appendix

Important Safety Instructions

Some of the following information may not apply to your particular product;

however, when using telephone equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and injury to

persons, including the following:
1.  Read and understand all instructions.
2.  Follow all warnings and instructions marked on the product.
3.  Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4. Telephones should not be used while you are in a bathtub, shower or pool.

Immersion of the telephone or handset in water could cause an electrical

shock.

5. Slots and openings in the cabinet back or bottom are provided for

ventilation, to protect it from overheating. Do not block or cover these

openings. Do not block the openings by placing the product on a bed,

sofa, rug, or other similar surface. Do not place this product in a built-in

installation unless proper ventilation is provided.

6. Only operate this product from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home,

consult your dealer or local power company.

7. Plug the adapter into an easily accessible electrical outlet near the

equipment.

8. Do not allow anything to rest on the power cord. Do not locate this product

where the cord will be abused by persons walking on it.

9. Do not overload wall outlets and extension cords as this can result in the risk

of fire or electric shock.

10. Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short out parts that could

result in a risk of fire or electric shock.

11. Never spill liquid of any kind on the product.
12. To reduce the risk of electric shock, do not disassemble this product.

Opening or removing covers may expose you to dangerous voltages

or other risks. Incorrect reassembly can cause electric shock when the

appliance is subsequently used.

Summary of Contents for 30524
























































































Search results

Summary of Contents for 30524

Reviews:

Related manuals for 30524

Brands by name

Popular brands

GE 30524, User Manual

Search results

Summary of Contents for 30524

Reviews:

Related manuals for 30524

Brands by name

Popular brands