GE 30524 User Manual Download

Page: 13 / 87

Getting started

Battery installation

CAUTION:

1. Use only the supplied rechargeable battery or equivalent replacement battery.

See battery specifications on the

Technical specification page or visit our

website at www.gephones.com

to find out how to order a replacement battery if

necessary.
2. If the handset will not be used for an extended period of time, unplug the battery

and remove it from the handset to prevent possible leakage.

Please fully charge your handset before use!

For optimum battery performance, charge the battery for 16 hours

before first use.

NOTE: Use only the supplied rechargeable battery or replacement battery. Visit our website

at www.gephones.com to order a replacement battery if necessary.

1. Plug the battery connector securely into

the socket inside the handset battery

compartment. Make sure that red and

black wires on the plug are properly

inserted into the socket as shown.

2. Place the battery

and the wire inside

the battery

compartment.

4. Place the handset onto the charger as shown. An animated battery

icon will display after a few minutes to show that the handset

battery is successfully being charged. For optimum performance,

please allow the battery to charge for 16 hours before first use.

3. Align the cover

against the battery

compartment and

slide it upwards

until it clicks into

place.

Animated

charging

indicator

red

wire

black

wire

Summary of Contents for 30524
























































































Search results

Summary of Contents for 30524

Reviews:

Related manuals for 30524

Brands by name

Popular brands

GE 30524, User Manual

Search results

Summary of Contents for 30524

Reviews:

Related manuals for 30524

Brands by name

Popular brands