GE Security TruVision DVR 10 User Manual Download

Page: 94 / 112

Chapter 7: Upgrading the firmware

TruVision DVR 10 User Manual

2. Select the USB upgrade mode.

Connect a USB flash memory to the TVR 10 and confirm that the firmware file is in
the root directory. Click USB to start the upgrade.

Note:

The firmware must be downloaded to the USB main directory and the file

named “digicap.”

3. When finished, right-click or press ESC to return to the main menu.
4. Reboot the TVR 10.

Upgrading through the Web browser

You can log in to the TVR 10 Web browser to perform a firmware upgrade. Prior to
upgrade, ensure that you have the

digicap.DAV

file in the workstation you are

accessing the TVR 10 from.

To upgrade the firmware through the Web browser:

1.  Log in to the TVR 10 Web browser.
2.  Select the Configure button.
3.  Select the Others tab.

You will need to scroll right through several tabs to locate the Others tab.

4. Click Remote Upgrading.
5. Click Explore and locate the

digicap.DAV

file in your workstation.

6. Click Upgrade. You will receive a prompt asking you to reboot the TVR 10.
7. Click Reboot to reboot the TVR 10.

Summary of Contents for TruVision DVR 10

















































































































Search results

Summary of Contents for TruVision DVR 10

Reviews:

Related manuals for TruVision DVR 10

Brands by name

Popular brands

GE Security TruVision DVR 10, User Manual

Search results

Summary of Contents for TruVision DVR 10

Reviews:

Related manuals for TruVision DVR 10

Brands by name

Popular brands