View zone status
Step 1
Enter the
[
r
]
key followed by the
[ ]
key. The LCD Screen will display the zone status.
Step 2
Use the up and down scroll keys
[ ][ ]
to browse through the descriptions. The LCD Screen
will display the list of all zones in sequential order by zone number.
Step 3
Press
[#]
to exit this function.
Setting the keypad tone
Step 1
Press the
[
r
]
key followed by the
[0]
key.
Keypad is now in the “Adjust Tone” mode.
Step 2
Press the
[ ]
up scroll key located on the right
side of the display to make the keypad sounder
go to higher tones.
Step 3
Press the
[ ]
down scroll key to make the keypad sounder
adjust to lower tones.
Step 4
When the desired tone is reached, press the
[#]
key to set this tone and exit from the “Adjust
Raise tone
Lower tone
1 Alarm Memory
ZONE 1
Tone” mode.
View alarm memory
Step 1
Press the
[
r
]
followed by the
[3]
key to display the
zone(s) on the keypad that created the last alarm
.
Step 2
The LCD Screen will display the zone description
for those zones.
Step 3
Press [#] to exit the alarm memory.
Programming phone numbers (optional)
If private reporting (voice or siren tone) is enabled, up to 3 phone numbers can be programmed or changed. A
telephone number towards a central monitoring station cannot be changed or reviewed.
Step 1
Disarm the system if it is not already disarmed.
Step 2
Press the
[
r
]
key followed by
:
[4]
[1]
to program/change telephone number 1
[4] [2]
to program/change telephone number 2
[4] [3]
to program/change telephone number 3
Step 3
The LCD display will prompt you for a code. Enter a master code. If the number cannot be
changed, the keypad sounder will produde 3 short beeps.
NX-1248E User manual
Page 15
16/04/05
