GE HEALTHCARE Logiq Book XP series, Basic Service Manual

Page: 87 / 226

GE H
EALTHCARE
D
IRECTION
5194296-100, R
EVISION
10 LOGIQ B
OOK
XP S
ERIES
B
ASIC
S
ERVICE
M
ANUAL
Chapter 3 Installation 3-31
3-9-1-2 Upgrading Application Software (For R2.2.1 or lower) (cont’d)
10.)When it completes loading, the system will reboot.
11.)Remove the CD from the drive.
If possible, while the system is rebooting remove the CD from the drive. If you didn’t do that don’t worry
you will get a dialog box like the one shown in
Figure 3-26 on page 3-31 .
12.)REMOVE the Applications CD
13.)From the Start Applications dialog box, select START.
14.)Select UPGRADE button to upgrade the FPGA while the following message box appears by
pressing the unmarked key of the trackball.
Figure 3-25 Software Load Complete
Figure 3-26 Start Software
Figure 3-27 Upgrade FPGA