EN
16/44
2.20. NOISE GENERATION
In some cases noise generation can result from an unfavourable combination of particular parameters, e.g.
flow rate and pressure range, but also gas type. In such cases please contact the manufacturer.
2.21. LAWS, DIRECTIVES, NORMS, REGULATIONS
LAWS AND REGULATIONS
•
GSG Device security law with aVV General administrative regulations to the GSG, 6. GSGV pressure vessel
regulations, 7. GSGV Regulation on gas consumption facilities and GasHL-VO Regulation on high pressure
pipe lines.
•
ChemG Law for use of chemical substances with corresponding GefStoffV Regulations on dangerous
substances and ArbstoffV Law concerning technical working materials.
•
AcetV Acetylen regulations BImSchG Law for protection against neighbouring effects of gases, smoke
noise, smells etc. with BImSchV FCKW-Halon-Prohibition-Regulation and 2.
•
BImSchV Emission Limitation of volatile Halogenated Hydrocarbons
•
Technical Norms, Regulations to Accident Prevention
TECHNICAL NORMS
•
TRB Technical norms for pressure vessels 610, 700, 801 / 26, 801 / 27.
•
TRR Technical norms for pipe lines. TRR 100.
•
TRG Technical norms for pressure gases
•
TRG 100, 101, 102, 103, 104, 250, 253, 254, 256, 280, 310, 311, 360, 370.
•
TRGL Technical norms for high pressure gas pipes
•
TRGL 101, 111, 141, 151, 161, 171, 181, 191, 195, 201, 211, 231, 241, 242, 251, 261, 291, 295, 501, 511, 521.
•
UVV Accident prevention regulations
•
VBG 1, 4, 15, 50, 61, 62.
•
ZH 1 Trade association guidelines
•
ZH1/8 u.f., ZH1/10, ZH1/15, ZH1/16, ZH1/20, ZH1/20.1, ZH1/108 u.f., ZH1/119, ZH1/180, ZH1/244, ZH1/288,
ZH1/298, ZH1/307, ZH1/309, ZH1/383, ZH1/384, ZH1/399, ZH1/400, ZH1/409, ZH1/479, ZH1/605.
SO-STANDARDS (INTERNAT. ORGANISATION FOR STANDARDIZATION)
•
ISO 2503.
CEN-STANDARDS (EUROPEAN COMMITTEE FOR STANDARDIZATION)
•
EN 585, 837.
DIN STANDARDS
•
DIN 8545, 3380, 2462, 2403, 12920, 12925,16006.
VDE REGULATIONS
•
VDE 0100, 0170, 0190.
DATA SHEETS
•
Series 500.
COUNTRY SPECIFIC NATIONAL LAWS, DIRECTIVES, NORMS AND REGULATIONS
STORAGE, TRANSPORT
For storage all parts must be packed in a clean condition, dust-free, dry, and well closed. Use only appropri-
ate packing material. Do not use cleaning agents which contain solvents!
All components which have been in contact with corrosive or toxic gases must be purged with an inert gas
before redelivering to the manufacturer.
TECHNICAL DATA
4.1. DATA SHEETS
You will find all technical data inside of the technical data sheets. They are valid together with this operating
instructions, especially:
•
nominal pressure
•
pressure range of pressure device
•
materials
•
connections
3.
4.
•
dimensions
•
tightness
•
electric operating conditions
•
temperature range.
Summary of Contents for 200
Page 43: ......