GCC Technologies P3-60, User Manual

Page: 15 / 179

Puma III User Manual
Installation 2-4
Step 5
Insert the roll holder support with the screws into the holes of the stand, and then
tighten them up as shown in
Figure 2-4
. You could decide roll holder support’s
position by inserting into different holes.
Step 6
Place two roll holders onto the roll holder support and ensure the white protrusion
is wedged in the groove. (
Figure 2-5
)
Roll holder
4 screws
Figure 2-4
Roll holder support
Roll holders
Figure 2-5