GCC Technologies Jaguar IV Series User Manual Download Page 92

Page: 92 / 166

Jaguar IV User Manual

SignPal 10.5 Instruction A-4

The new SignPal 10.5 Software is Windows System compatible and all versions support the AAS II contour cutting

function of RX, Jaguar IV, Puma III, Expert 24 LX, and Expert 52 LX cutting plotters.

SignPal 10.5 Instruction Index:

[1] Installing the SignPal 10.5 software

[2] Set up your GCC Cutter on Production Manager

-- SignPal AAS II Quick Start

[3] SignPal 10.5 Feature Lists

[1] Installing the SignPal 10.5 software

To install the software, you must have Administrator privileges. To use the software, you must

have Administrator or Power User privileges. See your Windows user guide for more

information.

1. Make sure the dongle is inserted.

2. Uninstall any previous version of the software.

3. Insert the Installation DVD.

4. Select a language and click OK.

5. Click Next.

Please note that the pictures below of SignPal 10.5 serve as illustrations in the following steps.

SignPal 10.5 Instruction

Summary of Contents for Jaguar IV Series







































































































































































Search results

Summary of Contents for Jaguar IV Series

Reviews:

Related manuals for Jaguar IV Series

Brands by name

Popular brands

GCC Technologies Jaguar IV Series, User Manual

Search results

Summary of Contents for Jaguar IV Series

Reviews:

Related manuals for Jaguar IV Series

Brands by name

Popular brands