GBR Systems M-40, Operator'S And Service Manual

Page: 49 / 161

M-40 OPERATOR & SERVICE MANUAL ISSUE 05/01 OPERATION
SECTION B – PAGE 33
Maintenance Table Weekly Monthly Annual
Check oil level. During standstill the correct
level is between the max. and min.
indications. Use only genuine SJ-27 synthetic
oil. Do not overfill

Remove Auto Drain condensate bottle from
compressor and empty.

Check compressor, air tubes and equipment
for leaks and check pumping time.

Inspect, clean or replace intake filter.

Clean the compressor with a soft, damp
cloth. Dust and dirt prevent cooling.

Test the safety valve by gently pulling
protruding rod with ring attached.

Check regulator filters for contaminants and
clean.

Check the O-ring in the check valve and
replace if necessary. NOTE: Empty receiver
of air before dismounting.

NOTE: See Section C Maintenance for more information on
Compressor parts.