gbo SONOSTAT 135, User Manual

Page: 9 / 34

SONOSTAT 135 9

gbo Medizintechnik AG 2004 Version 1.3
2.3 Settings
You can open the main menu by pressing the
softkey [menu]
. It provides the following submenus:
• Settings
Softkeys Softkeys
Figure 3: Menu
The basic and unit settings are unit-specific or user-specific settings (see Table 1). These settings should be
made during the installation by a medical product adviser or a service technician. Once the device has been
switched on and is ready, you can start immediately with the standard settings.
!!
Note!
•
The main menu can be chosen with the black menu key only, if the ultrasound power is „0.0“ , i.e.
no therapy is active any more.
•
During modification of the settings a return is always possible with the
softkey
[
Back
].
Modification of the settings:
1. Press the
softkey [menu]
.
2. You are in the menu ( see Figure 3: Menu).
3. Move the scroll bar with the
modification keys
to Settings.
4. Confirm by pressing the
softkey [cont.]
.
5. You are in the menu Settings. The menu provides the following options:
•
Acc. coupling control
•
Timer coupling control
•
Ultrasound power emission
•
Treatment time
•
Volume gong
•
Volume beeper
•
Display contrast
•
Language
•
Reset settings
6. Move the scroll bar with the
modification keys
to the setting to be changed.
7. Confirm by pressing the
softkey [Cont.]
.
8. Move the cursor or change the value with the
modification keys
to the desired value.
9. Confirm by pressing the
softkey [Store]
.
10. Exit the menu Settings by pressing the
soft
key
[Back]
.
11. On the display the Menu appears again.