background image

SONOSTAT 135 

 

 

 

gbo Medizintechnik AG 2004

 

Version 1.3

 

 

 

1 Introduction 

1.1 Intended use 

The 

SONOSTAT 135

 is a classical ultrasound therapy device for constant and pulsed ultrasound. All 

applications are to be executed with easy and safety.

 

 
The ultrasound therapy device 

SONOSTAT 135

 generates ultrasound waves by means of the two main 

components, the generator and the treatment probe. The resulting effects may be distinguished as follows: 
 
a)  Mechanical effects (primary effect)

 

The ultrasound wave causes a vibration and acceleration of the mass particles in 
the exposed tissue (high-frequency vibration massage). 

 
b)  Thermal effects (primary effect)

 

The temperature in the area of the exposed tissue rises locally. The energy flow and temperature in the 
tissue being treated is determined by the absorption and reflection of ultrasound. This will vary greatly 
according to the tissue involved. 

 
c)  Piezoelectric effect (primary effect)

 

Under alternating mechanical pressure, electrical potentials are induced which increase cell activity, 
particularly in bones. 

 
In addition: biological effects (secondary effect) 

Due to thermal and mechanical processes, biological effects such as increased membrane permeability 
and vascular dilation are achieved. As a consequence, the patient experiences a relief from pain. 

 

Due to its mechanical, thermal, chemical and biological effects, ultrasound can be effectively used for the 

treatment of: 

 

• 

inflammatory, rheumatic diseases of the muscoloskeletal system

 

 

• 

traumatic affections such as contusions, distortions or contractures

 

 

• 

inflammatory diseases of the peripheral nerves (neuritis or neuralgias)

 

 

• 

peripheral circulatory and inflammatory diseases.

 

 

The range of application is extended by pulse mode. Inflammatory processes can also be treated purposeful. 
  
The 

SONOSTAT 135

 generates the ultrasound frequencies 1 MHz as well as 3 MHz. Basically, as higher 

the ultrasound frequency, as lower is the penetration of ultrasound. According to this, 3 MHz is 
recommended for treatments of superficial indications. 
 
In addition the 

SONOSTAT 135

 offers indication programs. By selecting the desired indication, the 

appropriate therapy time, ultrasound power, frequency and constant or pulsed ultrasound are selected 
automatically.  
 

Summary of Contents for SONOSTAT 135



































Reviews: