Duodynator
9
gbo Medizintechnik AG
Version 1.2
Warning!
To avoid the risk of electric shock, the
Duodynator
and also the
combination of devices
Duodynator
-
Neoserv
must only be
connected to the mains with protective earth!
Turn on the
Duodynator
by the power button on the rear panel. When
Neoserv
is
connected and should also be used, it must also be turned on using the power switch
on the back.
The
Duodynator
is equipped with a SD card slot, located
to the right of the display. This port is intended only for
service purposes.
2.4
Placing out of operation
In order to disconnect the device just disconnect it from the mains power supply. No
other measures are to be taken.
SD card slot
AC power connector
with fuse for Neoserv
ON / Off switch for
Neoserv
ON / Off switch for
Duodynator
Data
connection
between
Duodynator
and Neoserv
AC power connector
with
fuse
for
Duodynator