© GBC Films Group April 2000
Voyager Operation and Maintenance Manual
Page 1 - 20
Operations
6. KNIFE ADJUST: Moves the table and knife from
one side to the other side when turned.
7. PULL ROLLER NIP ADJUST: Raises or lowers
the upper pull roll when turned.
8. SNAPPING ADJUST: The right adjust dial
controls the control side snapping speed and strength.
The left adjust dial controls the drive side snapping
speed and strength.
9. DRAW ROLLER GUIDES: Guides the sheets after
the snap onto the catch table.
10. DRAW CONTROL ROLLER: Adjusts the angle
of the sheet exiting the laminator.
11. LATERAL FILM ADJUST: Moves the unwind
shaft from one side to the other side when turned.
