![background image](http://html1.mh-extra.com/html/gbc/voyager/voyager_instruction-manual_571051031.webp)
© GBC Films Group April 2000
Voyager Operation and Maintenance Manual
Page 1 - 29
Application
5.2 Feeding head unit
At this point you should have loaded sheets onto
the table. Making adjustments to the feeding head unit
are quick and easy if the steps are followed precisely.
To load the sheets, take the following steps:
a. Slide the feeding head unit forward toward the sheet
stack.
b. Stop when the sheet stack tabs make slight contact
with the back of the sheets.
c. Press laminator start.
INFORMATION
D o n o t t u r n t h e V A C U U M P U M P o n .
You only want the feeding head
unit to move, not feed sheets.
d. Set laminator speed to 15.
e. Use the feeding height adjust to set the feeding head
unit height.