© GBC Films Group April 2000
Voyager Operation and Maintenance Manual
Page 1 - 37
Application
d. Guide the film under the bow roller and allow the film
to hang about half way over the heat roller.
e. Adhere one sheet to the activated film on the heat
roller.
f. Guide the free end of the sheet into the main nip rollers.
i. Engage the unwind shaft clutch.
j. Set the unwind brake pressure to 5 p.s.i. Refer to image
above Just enough to hold the film in place.
k. Turn VACUUM PUMP to “ ON ”
l. Press LAMINATOR START.