21
PANASONIC SYSTEM
Item
RANGE
Shows the approximate distance you
can still travel with your e-bike with the
remaining battery charge.
Remaining
battery
charge
Shows the remaining battery charge as
a percentage.
4.3.5 Battery charge status read-out
The current state of charge of the battery
can be read off the display in the Battery
charge level display field
5
.
You can also check the e-bike’s battery
charge on the battery LEDs.
Display read-out (LCD)
Battery capacity
80% to 100%
60% to 80%
40% to 60%
20% to 40%
10% to 20%
1% to 10%
Motor assistance will be switched off if
the battery charge status drops below 5%.
The remaining charge will be used for the
display and lighting, sufficient for a further
2 hours of use approximately.
4.3.6 Changing assistance
Press selection buttons
▲
/
▼
until the
desired assistance level is shown. The dis-
play indicates the strength of the assistance
you are currently getting from the motor.
You can change the assistance level
at any time, even on the move.
Indication
Assistance
HIGH
You have powerful assistance while
pedalling and you can cycle comfort-
ably, even up hills or carrying heavy
loads.
STANDARD
Steady assistance with long range.
ECO
Assistance is less intensive and you can
travel further on a single charge.
NO ASSIST
You have no assistance while cycling.
4.3.7 Walk assist button (wheeling aid)
With walk assist button
4
(wheeling aid)
the bike moves forward slowly while you
walk next to it, for instance when you are
manoeuvring in a tight space or pushing
your bike out of a parking facility. To acti-
vate the walk assist function you need to
press and hold walk assist button
4
.
Do not press walk assist button
4
if
the e-bike wheels are off the ground.
This could cause injury.
4.3.8 Switching lighting on/off
Lighting button
2
switches the front and
rear lights on simultaneously. They are
powered by the battery. Lighting mode
10
shows on the display when the lights are
switched on.
