14
GAZELLE MANUAL
3.8 FAULT CAUSES AND REMEDIES
Description
Remedy
Charging fault
The battery printed circuit board (PCB) is
showing a fault.
The PCB needs to be replaced. Take the
e-bike to your Gazelle specialist.
Flashing while [E]
moves to [F]
Charging fault
Power supply fault
Cell fault
Possible causes for these faults include a
battery PCB fault, a cell fault or a motor or
charger fault.
Take the e-bike to your Gazelle specialist.
Faulty printed circuit board
Temperature fault
The battery is hot or the PCB is showing a
fault.
If the lights continue to flash after having
waited a while, then components need to
be replaced. Take the e-bike to your Gazelle
specialist.
Cell fault
Verification error
Possible causes for this are a battery cell
fault, a verification error, or the battery has
overheated while charging.
Check contacts for dirt. If the lights keep on
flashing after you have removed any dirt
from the contacts and have left the battery
to rest for a while, you will need to take your
e-bike to your Gazelle specialist.
