20
GAZELLE MANUAL
To change the basic settings, press and hold
mode button
3
and decrease value button
1
(
▼
) on the control unit until
[LANGUAGE]
appears in Text indication field
8
on the
display.
Press increase/decrease value buttons
1
▲
/
▼
until the basic setting you want to
change is shown. Now press mode button
3
to enable the basic setting to be changed.
You then make the changes using increase/
decrease value buttons
▲
/
▼
.
Once you have set the correct value, press
mode button
3
again to confirm it.
Now press night mode button
2
to save the
new setting.
4.3.3 Resetting values
The
[TRIP], [AVG]
and
[MAX]
values can be
reset at the same time. Do this by pressing
mode button
3
to show one of the values
and keep pressing mode button
3
until “0”
appears.
3
3
Resetting values
4.3.4 Speed and indication functions
11
12
8
3
8
3
11 12
Speed and indication functions
The current speed read-out is in the Speed
indication field
11
.
The distance and remaining battery capac-
ity read-outs are in Text indication
8
and
Value indication
12
fields.
Press mode button
3
on the control unit or
on the LCD side display to change the item.
Item
[TRIP]
Shows the distance travelled.
[AVG]
Shows the average speed.
[MAX]
Shows the maximum speed up to that
point.
[TOT]
Shows the total distance travelled since
starting to use the bike.
You can reset this value by pressing and
holding the reset button on the back of
the display and mode button
3
on the
control unit simultaneously.
