22
GAZELLE MANUAL
10
10
2
Switching lighting on and off
1. Press on/off button
14
.
The e-bike will be switched on and the
background lighting in the display lights
up in normal mode.
2. Press lighting button
2
.
Lighting mode
10
shows on the display
and the background lighting switches
to night mode. Press the lighting button
again to switch back to normal mode.
The lighting button can also be used to
change the brightness of the background
lighting in the display. You can set back-
ground lighting separately for normal mode
and night mode.
If you press the lighting button while
the e-bike is switched off, this will
activate the display and select the night
mode brightness setting and all functions
on the display apart from walk assist will be
active. The system needs to be switched on
using the on/off button in order to activate
the walk assist function.
Pressing the lighting button again switches
off the display and display functions.
Background lighting is less bright in light-
ing mode than in normal mode so the illu-
mination will not distract you while cycling
in the dark.
You can set normal mode brightness when
the lighting is switched off. You can set
night mode brightness when the when
lighting is actually switched on.
4.3.9 USB connection
You can charge external devices (e.g. a
mobile phone) by connecting them to the
display using a micro USB cable. Maximum
charging current is 1.1 A. External devices
can only be charged if the display and a
charged battery are fitted on the e-bike.
16
15
LCD centre display micro USB connection
