SERVICE MANUAL
Medi-Therm II
w
w
w
.g
aymar
.com P/N 10187-000 7/98
Before you begin . . .
CAUTION
Federal law restricts this device to sale by
or on the order of a physician.
SAFETY PRECAUTIONS
WARNING
•
Repairs should be performed only by qualified
personnel such as certified biomedical
electronics technicians or certified clinical
engineers familiar with repair practices for
servicing medical devices, and in accordance
with the
Medi-Therm II Service Manual.
•
Always perform the
FUNCTIONAL CHECK
AND SAFETY INSPECTION
(section 7.3, p. 20)
after making repairs and before returning the
Medi-Therm II machine to patient use.
Improper repair may result in death or
serious injury, equipment damage, or
malfunction.
RECEIVING INSPECTION
Upon receipt, unpack the Medi-Therm II machine. Save all
packing material. Perform a visual and mechanical
inspection for concealed damage by removing the
wraparound from the chassis (see page 73). If any damage
is found, notify the carrier at once and ask for a written
inspection. Photograph any damage and prepare a written
record. Failure to do this within 15 days may result in loss
of claim.
Refer to section 7.0 of this
Medi-Therm II Service Manual
for
additional details.
OPERATING INSTRUCTIONS
For information on operating the Medi-Therm II machine,
refer to the
Medi-Therm II Operating Instructions.
Clik-Tite is a registered trademark of Gaymar Industries, Inc.
©1998. Gaymar Industries, Inc. All rights reserved.
Do not return the Medi-Therm II machine to
Gaymar Industries without first contacting
Gaymar's Technical Service Department for
assistance.
Telephone:
Direct
(716) 662-2551
Toll Free
1 800 828-7341
IMPORTANT
Before operating the Medi-Therm II machine, remove
the compressor shipping brace. See p. 86, figure B.
