Instructions for DKC500ACL/DKC800ACL
www.gatexpertstore.com
5
Additional remote controls:
Spare/Additional remotes for the automatic gate kit, these will need to
be paired to the motor.
Infrared photocell:
Detects pedestrians, vehicles and objects that cross an infrared beam and
prevents the gate from closing.
Wireless keypad:
Allows secure access through the gate used with a user set code.
Wired control:
Allow users to control the opening and closing of the door through an external
push-button.
Alarm lamp:
Alerts people near the gate and users that the gate is in operation.
Technical Parameters
Model
DKC500ACL
DKC800ACL
Power Supply
110VAC/60Hz
Motor Power
280W
380W
Gate Moving Speed
13m/min
Maximum Loading Weight
600KG
800KG
Remote Control Distance
≥30m
Remote Control Mode
Single button mode
Limit Switch
Magnetic limit switch
Working Noise
≤56dB
≤58dB
Working Duty
S2, 20min
Recording of up Remote Controls
Standard control board: 25; Intelligent control board: 40
Remote Frequency
433.92 MHz
Working Temperature
-20°C - +70°C
Package Weight
16.42KG
16.5KG
Installation
Before You Start
·
DKC500ACL/DKC800ACL Sliding Gate Automation Kit is suitable for powering the opening and
closing motion of gates up to 600kg,800kg in weight, up to a length of 12m. (Standard kit
contains a 6m chain, if the gate length is over 5.5m, please consider to extend the length of the
chain.)
·
Gate motion is achieved by the rotating output sprocket of the gate opener driving the chain
fitted to the moving gate.
·
The gate opener requires you to press the remote control once to open, and once again to
close. This is a safety feature to ensure safe operation.
·
The gate opener itself must be fitted within private property, never externally to a property’s
boundary.
Any works done to the gate opener must be completed whilst the power is off and the opener is
unplugged. Any modifications/alterations/works to AC power components must only be completed by
a licensed electrician.
