Gateway Laptop Reference Manual Download Page 25

Page: 25 / 152

www.gateway.com

Connect the AC adapter to your notebook’s power
connector.

Plug the power cord into a wall outlet. The battery
charge indicator turns on (see

for the

location of the battery charge indicator). If the battery
charge indicator does not turn on, complete the
following steps until it turns on:

Unplug the adapter from your notebook, then plug
it back in.

Press

to toggle the status lights on and off.

Make sure the power cord is firmly attached to the
AC adapter.

Plug the power cord into a different wall outlet.

When you finish using your notebook for the first time,
turn off your notebook and leave your notebook
connected to AC power until the battery charge
indicator turns blue.

Important

If the battery charge indicator does not turn blue after three

hours, contact Gateway Customer Care at the location shown on the
Customer Care label. For more information, see

“Gateway contact

information” on page 3

Summary of Contents for Laptop

























































































































































Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands

Gateway Laptop, Reference Manual

Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands