13
8
HANDLING THE MACHINE
When lifting and / or moving the machine, it is essential to follow the instructions in this section, all
safety instructions and local safety standards as well as guidelines in force.
ATTENTION! Before carrying out a transport operation, check the total weight of the machine with and without
Packing and use accordingly, appropriately, correctly positioned equipment around the packed / unpacked
Lift the machine according to the procedure specified below.
Lifting the packaged machine (with a forklift or
pallet truck)
• Retract the forks into the pallet as shown in the following illustrations.
• Primary handling instructions for the device:
• Make sure the lifter is suitable for the load being transported.
• Open the lift forks to the required width to position them correctly
without damaging the pallet and / or the machine itself.
• Place the forks in barycentric position. This does not always
correspond to the center of the packaged machine.
• Before lifting the packaged machine, make sure that the ends of the
forks protrude from the pallet.
• When moving the machine, keep it near the ground.
• Make sure that the area where the load is moved is free of objects,
people and animals.
• suitable protective clothing.
Manually moving the unpacked machine
ATTENTION! Before moving the machine in any way, make
sure it has been disconnected from the power supply (by turning
off the main power switch and disconnecting the power plug of
the machine from the power outlet).
The unpacked machine can be moved manually thanks to the
rollers mounted below the machine. When the machine is
moved this way, follow these precautions:
• The machine must be moved slowly and carefully.
• The machine may only be moved over flat, level and solid
surfaces without any output level changes.
The machine rests on four rollers: two rotating rollers (B) on the
back and two rotating roller (A) on the front. The machine can be
moved manually by turning up the auxiliary screw (C).. This
procedure is useful for moving the machine under it to clean the
surfaces.
