7
Touching the buttons, the relevant adjustment page will be displayed.
It is recommended to not connect the main battery nor the servos during the first stages
of the setup to avoid uncommand movements.
Radio:
There are different options for the radio commands. First you should decide if you will
use separated channels or BUS. Bus is convenient when the receiver outputs are
reduced but the TX has more channels, for example, a TX of 16 channels being used
with an 8ch receiver. You can set the LG19 in BUS mode, and assign three of the
channels not available in the RX (say 9, 10 and 11) to control the Gear, Brakes and
steering servo, leaving all 8 channels on the RX available for all other functions.
Touch the RCMode button to select the type of RC you wish to use. The screen will
change trough all available modes.
Standard servo, Futaba SBUS, UDI, SRXL, XBUS_A,
JetiEX
.,
P2Bus, MPX, XBUS_B.
