10
Select the servo output to be adjusted (1
…
8) using the buttons on upper line.
Touch the
Open
button to adjust the position of the door when in OPEN position.
Using the position buttons, adjust the door to the desired position.
Touch the
Close
button to adjust the position of the door in CLOSED position.
If the readings are below 60%, you may consider changing the mechanical links to have
more servo travel and higher torque at the door. Specially check that the servo is not
fighting against a hard stop, this would cause the servo to burn quickly. If possible, use
an amperemeter to check the power used by the servos to assure that they are not
mechanically overloaded.
Servo Speed:
The adjustment procedure is similar to the previous section. This screen will allow to
adjust the speed desired to open or close a particular door, the speed in each direction
is defined separately.
Servo Drive:
This menu is self-explanatory. Press the
“
Change
”
button in order to navigate through
the servo drive options available.
