2
Welcome!
Congratulations on the purchase of your new landing gear controller.
Xicoy
is dedicated
to the design and production of electronic controllers to the highest standards of quality
and reliability to bring you the customer the very latest next generation designs.
Features:
-Direct control of 3 motors in bidirectional mode up to 12V/12A (it depends on the
model). Supports the different motor shut-off control currently available (time, current
and encoder).
-Dual control of electric brakes, full proportional, lineal and adjustable pulsed mode.
-Differential brake mode, to steer the model using the brakes.
-Steering servo processor. Gain, sense and center can be adjusted. The steering servo is
centered during retraction.
-Internal Gyro. It can be mixed with the steering servo output and with the differential
brakes.
-8 servo outputs for the control of the doors, each channel has an independent re-
armable fuse, which prevents a complete shutdown of the servos if there
’
s a misfunction
on one of them. The endpoints of each servo can be programmed individually. The
servo speed can be programmed independent in the two directions in 0,1s resolution.
-Dedicated servo output switching regulator, rated to 6 V. The regulator draws power
from the battery instead of the receiver.
-10 step sequencer. The position of the gears and the position of the 8 doors can be
defined independent in each step. Step duration in 0,1s steps.
-Wide choice of RC inputs. Single RC channel, Dual RC channel, Futaba SBUS,
UDI/MPX/JR Mode B Bus, SRXL Bus, JR Mode A Bus, JETI EX Bus, Power Box P2Bus.
-The UI and the programming of the unit is done through a separated color
touchscreen. The touchscreen is not needed for the operation of the unit.
-uSD card slot to save the settings and upgrade the software.
-Advanced current cutoff control, current multiplier from start up and current multiplier
time.
