15
Bottom lines are displaying the current count, in order to help with the correct
adjustment of the value.
File:
The controller has a socket for a uSd card that is not necessary for normal operation,
nor supplied as standard.
The card allows to save all the settings to a file, load these settings, update the firmware
of the controller and set the default factory configuration. Bottom line displays the
current software version.
If the Factory Default button is pressed the following screen will appear:
Once the
“
Set Factory settings
”
button is pressed it will immediately erase all the
configuration stored, this means that all the sequencer, doors and everything will be set
to the factory test settings. Just use this option if you touched something on the
