17
Furthermore, if the safe retract is being used and detected the following will appear on
the main screen:
The green circle means that the model is inside the safe zone, otherwise it will turn red
and will mean that the model is outside the safe zone. If the communication with the
safe retract is lost/disconnected the feature will disappear and it won
’
t affect any landing
gear command.
Advanced motor Setup:
This screen will allow to multiply the startup current (the one that is chosen on the
motors menu) for the first tenths of a second. This will allow bigger landing gears which
have heavy loads and heavy current peaks to move with a lower cutoff current. The
default values are shown on the image.
By the time that this guide is being written this menu is hidden. The reason is simple, if
these parameters are changed recklessly it may cause heavy damage to the motors and
