4. Electrical Connection
Install a 10 amp general purpose outlet (GPO) in accordance with relevant
electrical standards and/or codes of practice applicable.
The power supply cord (supplied) must not touch against any hot surfaces and
must be placed so that its temperature does not exceed 75
℃
at any point along
its length.
After having installed the hotplate, the GPO must always be in an accessible
position.
Wiring diagram
5. Gas Connection
Install in accordance with relevant gas standards and/or codes of practice
applicable.
Connect the elbow fitting to the appliance gas manifold connection, and check
that seals between the elbow and manifold connection are in place and in good
condition.
● For Natural gas: connect the natural gas appliance regulator (pictured opposite)
with integral test point using approved gas thread tape or compound to the
elbow fitting.
● For Universal LPG: see page 11
1
2
3
4
1
2
3
4
GH60SSC
GH12SFC
1
2
3
4
GH30SFC
GH90SF
1
2
3
4
09
Australia:
1(844) 538-7890
www.gaslandchef.com
[email protected]
www.gaslandchef.com.au
United States: