4
SPROCKET SETUP
Parts required:
•
1 set Pineapple Sprocket Holder with nuts and bolts (Set includes two pineapple sprocket holders.
One is pre sliced perfectly in three pieces and the other one is a complete piece). Check the picture
for reference.
•
44T/60T #415 sprocket ( Included in the kit )
Installation:
•
Slide 1 out of 3 pieces of pre sliced pineapple sprocket adapter inside the spokes and align the slots
with the spokes.
•
Now take the sprocket and the full piece of sprocket adapter. Place them outside the spokes and
match the hole alignment with the inside piece.
•
Secure all the 3 parts using the 3 bolts and nuts. (included in the kit)
•
Repeat the procedure again to secure rest of the pieces using the nuts and bolts.
Summary of Contents for GasTrike 212CC
Page 1: ...1 GASBIKE s TRIKE CONVERSION KIT...
Page 2: ...2...
